CCRTK - SN/ZN SOLDER SPRAY/METALLIZING WIRE
- MSDS: CCRTK
- Manufacturer: KAPP ALLOY AND WIRE INC
- Product Name: SN/ZN SOLDER SPRAY/METALLIZING WIRE
- National Stock Number: 3439-00N074513
Product Identification
Product ID:SN/ZN SOLDER SPRAY/METALLIZING WIRE
MSDS Date:05/01/1991
FSC:3439
NIIN:00N074513
MSDS Number: CCRTK
Responsible Party
OIL CITY, PA 16301
US
Emergency Phone: 814-676-0613
Info Phone: 814-676-0613
Cage: JO420
Contractor
Telephone: 814-676-0613
Cage: 44851
Ingredients
TIN
CAS: 7440-31-5
RTECS: XP7320000
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3
ZINC (SARA 313) (CERCLA)
CAS: 7440-66-6
RTECS: ZG8600000
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 10 MG/M3 (MFR)
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: IT IS UNLIKELY THAT NORMAL
EXPOSURE TO THIS MATERIAL WOULD RESULT IN ACUTE ILLNESS. CHRONIC:
EXCESSIVE INHALATION OF ZINC OXIDE FUMES MAY PRODUCE SYMPTOMS KNOWN
AS ZINC SHAKES. SIGNS & SYMPTOMS OF EXPOSURE:(FLU-LIKE) HEADACHE,
DIZZINESS, NAUSEA. SELF LIMITING, USUALLY DISAPPEAR WITHIN 24
HOURS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.
First Aid
First Aid:SEEK MEDICAL ASSISTANCE FOR FURTHER TREATMENT, OBSERVATION
AND SUPPORT IF NECESSARY. EYES: RINSE WITH COOL WATER FOR AT LEAST
15 MINUTES. SKIN: WASH AND RINSE THOROUGHLY. INHALATION: REMOVE TO
FRESH A IR. TREATMENT SUCH AS BED REST, POSSIBLE ASPIRIN TO RELIEVE
FEVER AND CHILLS. INGESTION: CONSULT MD. THIS PRODUCT IS
NON-EDIBLE-METAL COMPOUND.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE OR DRY CHEMICAL EXTINGUISHER. DO NOT
USE WATER ON MOLTEN METAL.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:FINELY DIVIDED DUST MAY FORM EXPLOSIVE
MIXTURE WITH AIR. SHOULD NOT BE HEATED TO EXTREMES BEYOND MELTING
POINT.
Accidental Release
Spill Release Procedures:SOLID/RECYCLABLE. VACUUMING RECOMMENDED FOR
ACCUMULATED METAL DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DRY STORAGE. AMBIENT TEMPERATURE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH APPROVED RESPIRATOR WHEN DUST OR FUMES ARE
PRESENT.
Ventilation:LOCAL EXHAUST. MECHANICAL (GENERAL).
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
STD PROT EQUIP USED IN SOLDERING (/APPLICABLE) OPERATIONS.
Work Hygienic Practices:WASH EXPOSED AREAS WITH SOAP AND WATER BEFORE
EATING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:>390F,>199C
Spec Gravity:7.2 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER, ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, STRONG ALKALIS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL, STATE, FEDERAL,
AND OSHA REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.